Model Number

AW-050

The AW-050IDUR is  a  broadband  active MMDS repeater designed to receive,  am- plify, and retransmit (at the same frequency) up to 25 analog television channels or 150 digital channels (64QAM modulation).

The AW-050IDUR is designed to provide cost-effective  coverage  over  a  wide  area. With an omnidirectional transmit antenna, it can cover an area of approximately 6 Kilo- meter radius when  fully  loaded  with  25  channels, or 10 Km radius when loaded with

15 channels. A larger area can be covered if the desired coverage is less than 360 degrees in azimuth.

The input and output signals are in the 2.5-2.7 GHz  frequency  range. As in all broadband repeaters, the output power  de- pends on the number of channels. For exam- ple, with a 9 channel load the repeater deliv-ers  peak  power of  500mW per channel with a C/CTB of 50 dB.

The repeater is very easy to install and operate. It's compact design requires only 12.25 inches (31.2 cm) height in a stan- dard 19 inches (48.3 cm.) wide rack or cabinet . It is designed to operate indoors without air conditioning requirements.

The repeater features a modular design for ease of maintenance and service. The key modules are the 12 VDC power supply, power amplifier, diagnostic circuits, and an AGC circuit to maintain constant  out- put  levels  over  a  wide  range  of  input signals.

An optional feature offers the capability of monitoring the input and output at VHF frequencies.

Mr.Liao Hank
Guilin Aiwei Electronic Equipment CO.,LTD.
Get more info from   aiweihank at gmail dot com
Or   aiwei-hank at hotmail dot com
Web is treble w dot cn-aw dot com

Product Specifications ¹    

  AW-050IDUR

Input Frequency2:	2.5 to 2.7 GHz
Nominal Input Level for 12 TV:	-45 dBm/ch
Output Frequency2:	2.5 to 2.7 GHz
Output Level for 50 dB C/CTB : (measured with CW carriers)3	Channels Average Power dBm/Channel Peak Power dBm/Channel 6 24.5 27.0 11 23.0 25.5 15 21.0 23.5 20 19.0 21.5 25 18.0 20.5
Frequency Response:	±1 dB
Gain:	63 dB
Noise Figure:	5 dB
Input Return Loss:	15 dB
Input Connector:	Type "N"
Output Return Loss:	18 dB
Output Connector:	Type "N"
Temperature Range:	60° to 100°F (16° to 38°C)
Humidity:	95% max.
Primary Power:	120/240 VAC, 50/60Hz  (per customer specification)
Power Consumption:	600 VA RMS
Mounting:	19" EIA Standard Relay Rack
Weight:	53 lb.  (24 kg)
Dimensions:	19" rack width x12.5"H x 24"D (48.3cm W x 31.8cm H x 61cm D)

1 Specifications subject to change without prior notice.

2 Other frequencies av ailable

3 The C/CTB with modulated carriers is approximately 6 dB better than with CW carriers