Profile:

It is a high cost-effective rack mount digital satellite receiver. It has asynchronous data output port which has baud rate of 9600bps, 19200bps, 38400bps, 115200bps optional. It can decode the asynchronous data stream which is encoded by NDS and Philips uplink encoder. It also can transfer the satellite IF QPSK signal to ASI serial / SPI (LVDS) parallel TS stream.

Mr.Liao Hank
Guilin Aiwei Electronic Equipment CO.,LTD.
Get more info from   aiweihank at gmail dot com
Or   aiwei-hank at hotmail dot com
Web is treble w dot cn-aw dot com

IF input frequency	300--1000MHz
RF connector	F-type
Input impedance	75Ω
Input level	-65dBm - 25dBm
LNB power supply	13/18V/OFF, MAX.400mA
Band switch	0/22K switch

Audio output	Left/right, stereo , RCA connector
Video output	Complex video output, RCA connector, Y/C output, S-video connector
Low speed data interface	RS-232 ( optional baud rate of 9600bps, 19200bps, 38400bps, 115200bps), DB9 male connector
ASI serial TS output	BNC connector (optional)
SPI(LVDS level) parallel TS output	DB25 female connector (optional)
Standard	CD DVB-S EN300 421
Demodulation	QPSK
Symbol rate	2-45 MS/s
Roll off factor	0.35
Outer interleave	Reed Solomon (204, 188, 8)
Inner interleave	Interleaver I=12, constraint length K=7
FEC	1/2, 2/3, 3/4, 5/6, 7/8
Standard	CD ISO/IEC 13818-2, MPEG-2 MP@ML
Video aspect ratio	4:3, 16:9
Video format	PAL/NTSC
Standard	ISO/IEC 11172-3
Audio channel	Mono, Dual-channel, Stereo
Audio decoding	MPEG-1 Layer I and II
Volume adjustment	32-step volume adjustment

Operating Temp.	0℃ ~ 40 ℃
Size	1U standard rack
Power consumption	Max. 30W (standby: Max. 5W)
Power supply	AC 85 ~ 265V, 50~60Hz
Weight	2.35 Kg